Electra Jailbreak iOS 11.3.1 – iOS Jailbreak Multipath TCP Exploit with No Developer Account Required

Electra Jailbreak iOS 11.3.1 – iOS Jailbreak Multipath TCP Exploit with No Developer Account Required

Electra Jailbreak iOS 11.3.1 – iOS Jailbreak Multipath TCP Exploit with No Developer Account Required

Electra 1131 Hack Training

This guide will serve to show you how to use the iOS Jailbreak Multipath TCP Exploit with No Developer Account Required – The Electra Jailbreak for iOS 11.3.1 has been released and those who have waited and stayed on iOS 11.2-11.3 can finally jailbreak! This article is meant to be a guide for you to jailbreak in the easiest manner possible after some trial and error with our own device. These links will always be up to date so you can have the download links for everything required to jailbreak iOS 11.3.1 on your iDevice. You will need the Electra app, Cydia Impactor, and iTunes.

These links will always be up to date. You should bookmark this page for everything related to the iOS 11.3.1 jailbreak for future reference when the jailbreak is updated. You can find the links after the tutorial.

iOS Jailbreak Multipath TCP Exploit with No Developer Account Required

Install the iOS Jailbreak Multipath TCP Exploit with No Developer Account Required ipa from ignition.fun here: https://ignition.fun/index.php?lang=en#!/electra.php

Once Electra is done installing, don’t continue with the app but continue with the next steps.

1. Disable Find my iPhone + iCloud > Find my iPhone / iPad / iPod touch
2. Delete the 11.4 OTA update if downloaded – General > iPhone Storage > iOS 11.4
3. Disable Wi-Fi and VPN if used directly within settings, do not use the control center as it will fail.
4. Enter Airplane mode
5. Turn off Siri – Siri & Search > Press Home / Side Button for Siri
6. Download the tvOS beta profile to block OTA updates, download directly on your device – https://beta.thuthuatios.com/en/ 

Now Reboot the device you intend to jailbreak by holding down the power button. If you’re on an iPhone 7, 7 Plus, 8, 8 Plus, or an iPhone X, hold down the side button and volume up to get the slider to appear.

Open the Jailbreak iOS 11.3.1 Electra app and tap the Jailbreak button. The jailbreak exploit should complete successfully and your device will restart. It may take a few tries. Again, open the Electra app and tap Jailbreak. After your device resprings you’ll have Cydia.

Jailbreak 11.3.1 Downloads

 

Click here for more Hack Training tutorials!

How To Easily Install VNC Server In Ubuntu Linux

How To Easily Install VNC Server In Ubuntu Linux

easily install vnc

easily install vnc

Want to easily install VNC within Ubuntu so you can manage your VPS from your computer quickly? If so, here is a quick tutorial on how to easily install VNC within Ubuntu Linux. Type the following to get started:

First, install apt-get with the following: “sudo apt-get update -y”
Then install the latest version of Ubuntu Desktop “sudo apt-get install ubuntu-desktop -y”
VNC for your server: “sudo apt-get install vnc4server -y”
And finally the graphical interface: “sudo apt-get install gnome-panel -y”

Easily Install VNC Within Ubuntu Desktop

Once these commands have finished you should have Ubuntu Desktop successfully installed. Make sure each command has enough time to finish processing so that there is no overlap in the installation as this could cause corruption in the system.

Now you will need to type: “vncserver”

Now enter your 8 digit password twice. Once you have done this you will need to kill the process. To kill the VNC server process type in the following:

vncserver -kill :1
Now edit the VNC server:

vi .vnc/xstartup

Add the following:

#!/bin/sh
# Uncomment the following two lines

unset SESSION_MANAGER
# exec /etc/X11/xinit/xinitrc
gnome-session –session=gnome-classic &
gnome-panel&

press ESC then type “:WQ” to save the file

and then start the vncserver

Type: “:- vncserver”

Now you’re done! Now you will connect the VPS with the tigervnc viewer. You can download the viewer here: https://github.com/TigerVNC/tigervnc/

Now you will need to enter the IP address of your VPS server. Now add the port: 5901

And that’s it, you have successfully installed VNC viewer within Ubuntu! Now you can easily manage your Ubuntu desktop from Windows. You now have a secure VNC server and viewer up and running on your Ubuntu VPS server. You can manage your files and install software. You’re done, go have some fun within your new VPS environment.

To view our other tutorials you can visit https://hack.training/category/tutorials/

 

New, Free Social Media Bot for Instagram, Facebook, Twitter, Youtube and more

New, Free Social Media Bot for Instagram, Facebook, Twitter, Youtube and more

Free Social Media Bot

A new, free social media bot with a built in exchange has emerged to take on others such as addmefast. The website allows you to download the bot, add your accounts and it automatically starts using your accounts for following, liking and more to gain you points. I’ve been testing the bot for a little less than a day but I am very happy with the results. Things you add for use with your points are quick to be recognized. You will see likes, follows and views pretty quiclkly, unlike addmefast which is dying sadly. You can join here: http://bit.ly/topsocialbot

Soctop is a great alternative to all of the social media exchanges I have tested. The fact that they have their own bot takes the cake. It is better than any other free social media bot. It is also better than any exchange I’ve seen for social media follows, views, likes etc on Instagram, Facebook and Twitter. I haven’t tried it on the other platforms yet. They also cover Vkontakte (vk.com), OK.ru and ASK.fm which makes it quite well rounded. This is great for the future as the more people who use this free social media bot exchange, the more users can gain from it.

Yes, we said FREE Social Media Bot

If you haven’t already tried a social media exchange, they are great for when you are just starting an account. Some social media sites require a certain amount of followers for things. Like a username in your URL for instance for a Facebook page. Soctop can take care of that for you. It can be done within a short time so long as you run several accounts. The more accounts you run, the more credits.  Hopefully, they add more. I’d love to see a free Snapchat bot or Linkedin bot.

Again you can join here: http://bit.ly/topsocialbot or search for Soctop and check them out.

 

We are promoting:

How To Set up Metasploitable on Windows in Virtual Box

How To Set up Metasploitable on Windows in Virtual Box

Set up Metasploitable on Windows in Virtual Box

 

To get started you will need  Vagrant, Packer, and Virtualbox. Install these dependencies:

 

 

 

We recommend using these exact versions as the scripts were made for them.

Metasploitable on Windows – Install Vagrant reload plugin

Go to the directory in the command line to the directory where unpacked the Vagrant Reload plugin then run this command to install the Vagrant:

vagrant plugin install vagrant-reload

1 Install vagrant-reload

How To Set up Metasploitable on Windows in Virtual Box – 1 Install vagrant-reload

After Vagrant, continue with downloading Packer.

Metasploitable on Windows – Download Packer

The next step is to download Packer from the following download page:

https://www.packer.io/downloads.html

Download the latest version of Packer and unpack it the Metasploitable 3 master directory. Storing the binary of Packer in the direct Metasploitable 3 directory allows easy execution for setup without setting up additional requirements. After you copy the Packer file to the Metasploitable 3 directory, you may set up the virtual machine.

Metasploitable on Windows – Creating the Metasploitable 3 VM

After all of the pre-requisites have been met, you can use Packer to setup the VM in Virtualbox. Move the command line to the Metasploitable 3 location and run the following command from an elevated command line:

packer build windows_2008_r2.json

Build Metasploitable 3 with Packer

How To Set up Metasploitable on Windows in Virtual Box – Build Metasploitable 3 with Packer

Building the VM will take a while so be patient.

Build Metasploitable 3 with Packer finished

Build Metasploitable 3 with Packer – Build Metasploitable 3 once Packer is finished

When the script is finishes run:

vagrant box add windows_2008_r2_virtualbox.box –name=metasploitable3

vagrant box add windows_2008_r2_virtualbox

How To Set up Metasploitable on Windows in Virtual Box – vagrant box add windows_2008_r2_virtualbox

Once that is completely done, run one last command:

vagrant up

The installation of Metasploitable 3 should now be done and you can use the VM.

 

Metasploitable on Windows – Booting Metasploitable 3

Now that you have completed the installation of Metasploitabl you may boot in in Virtualbox. The default username for the virtual machine is “vagrant” with password “vagrant”.

Prevent Virus Infections with Sandboxie, The Virtual Environment Without a Virtual Machine

Prevent Virus Infections with Sandboxie, The Virtual Environment Without a Virtual Machine

Prevent Virus Infections with Sandboxie, The Virtual Environment Without a Virtual Machine

Trust No Program, that is Sandboxie’s motto…and we agree when it comes to programs from unknown sources. Which is why we are going to show you how to prevent virus infections with Sandboxie in this tutorial. Best of all, Sandboxie is free and nothing in this tutorial requires anything but a few minutes.

Prevent Virus Infections with Sandboxie, The Virtual Environment Without a Virtual Machine

Prevent Virus Infections with Sandboxie, The Virtual Environment Without a Virtual Machine

 

 

 

 

 

Sandboxie is a very useful security tool that runs on Windows 7 through Windows 10. It is essential to anyone who wants to download files and make sure they aren’t running anything malicious in the background. It is easy to prevent virus infections with Sandboxie with the right knowledge. Some of you may already be testing individual files on Virtual Machines like VMware Workstation or Virtual Box to prevent your host operating system from infection, and with Sandboxie you can do this without the need of a virtual machine that takes up more CPU and RAM than Sandboxie ever could.

So, what is Sandboxie? It is a virtual sandbox environment on your computer than can isolate programs so they cannot make permanent changes to your programs or PC. You can see what is running in the background to make sure the program is not bound with a RAT, Keylogger or other malicious software.

 

How to Use Sandboxie To Prevent Virus Infections with a Virtual Environment

Setting up Sandboxie

  1. Download Sandboxie from their download page and install it. You can find it here: http://www.sandboxie.com/index.php?DownloadSandboxie
  2. Once installed, Open the Sandboxie to configure it. Click on the system tray icon after opening it in your start menu or shortcut to open the control center.

How to Check If a File Is Infected

Step 1: Run a program in Sandboxie. Once you have a file you think is suspicious, you can right click the program and click “Run Sandboxed.”

Prevent Virus Infections with Sandboxie, The Virtual Environment Without a Virtual Machine

Prevent Virus Infections with Sandboxie, The Virtual Environment Without a Virtual Machine

 

 

 

 

Step 2. Choose the default box, wait a few seconds and click the button to continue within Sandboxie.

Step 3. Once you have opened your application in Sandboxie, you will see a yellow border indicating that it is sandboxed. Take a look at your Sandboxie control center to see the programs processes. You will see the default SandboxieRPCSs.exe and SandboxieDcomLaunch.exe and then your program.

How to Check If a File Is Infected

How to Check If a File Is Infected

 

 

 

 

 

 

 

 

 

 

 

 

If the program has a virus bound with it, the virus will show along with the Exe file. So instead of 143VPN.exe showing up alone you would see 143VPN.exe and underneath that another .exe, such as server.exe.

Step 4. Go to View, and select Files and Folders, then expand them. From here you can see if the program starts to make changes to your folders that are unnecessary for a typical program to run, such as messing with system settings. Keep expanding it to see if it drops anything.

Using Sandboxie to Prevent Virus Infections Is Simple Isn’t It?

Yes, it is a very great program to use to test files for infection and to keep them from changing things you don’t want if they happen to be infected. You can use Sandboxie to open a web browser as well to prevent it from leaking viruses from ads and other files onto your computer. Sandboxie is only one of many ways to protect yourself, and this is not a fail-safe or the only method of safety you should take to prevent virus infections. Remember, always to use a Virus Protection program and keep a firewall up as well, and keep safe when it comes to the internet. Don’t trust everything, or as Sandboxie says: Trust No Program

How To Disable Adblock Users on Your Website

How To Disable Adblock Users on Your Website

How To Disable Adblock Users on Your Website

So, you have ads on your website or blog, and you have put up ads to help fund the website, and you want to make the most of your ads? If so, read on. This article will show you how to disable Adblock on your website. Many people user adblocking software within their web browsers to block ads. With the help of some javascript tweaking, you can deny them access to your site. This will work for both AdBlock and AdBlock Plus.

Many people use ad blocking software within their web browsers to block ads. Even I use the software Adblock, and sometimes I am enticed to disable it within reason under certain circumstances. With the help of some javascript tweaking, you can deny them access to your site. This will work for both AdBlock and AdBlock Plus.

 

The Redirect Method To Disable Adblock

To disable AdBlock you can use a few methods, this method will redirect users who have Adblock installed to another page. First, you need to create advertisement.js file on your hosting server where your website is, in the root directory. Adblocking software will be triggered by it due to the name, so do not change the name. Then one you have done this, add this code into the file:

document.write('<div id="tester">an advertisement</div>');

Now add this code right under <body> tag:

<script type="text/javascript" src="/advertisement.js"></script>

<script type="text/javascript">
if (document.getElementById("tester") == undefined){
    window.location = "http://yourlandingpage/adblock.html";
    }
</script>

With this code, you will redirect users to your landing page where you can ask them to disable adblocking software in order to approach your page.

The Request Method of Blocking Adblock

If a user likes your content, chances are they will be willing to support your website. That is, as long as you don’t have disruptive or malicous ads. The best way to accomplish asking is to add an HTML code snippet to your website. The code:

<style>
#IFobOXDmeghc {
display: none;
margin-bottom: 50px;
padding: 30px 15px;
background: #143;
text-align: center;
font-weight: bold;
color: #ccc;
border-radius: 10px;
}
</style>

<div id=”IFobOXDmeghc”>
Our Website uses Ads to make revenue to keep the site running.<br>
Please consider supporting us by disabling your ad blocker for this website.
</div>

<script src=”/ads.js” type=”text/javascript”></script>
<script type=”text/javascript”>

if(!document.getElementById(‘xfzvSiCjtqgE’)){
document.getElementById(‘IFobOXDmeghc’).style.display=’block’;
}

</script>

An example of what it will look like:

 

Our Website uses Ads to make revenue to keep the site running.
Please consider supporting us by disabling your ad blocker for this website.

You can also use the Anti Adblock plugin for WordPress on your blog, provided you use WordPress. You can find several plugins here that do just that:

https://wordpress.org/plugins/tags/adblock